Focusrite RedNet Control 2

Focusrite RedNet Control 2

RedNet Control is the mileage software program at the coronary heart of each RedNet system. With RedNet Control walking on your Mac or PC, you have managed overall the RedNet bias on your Dante community and the functionality to customize the way your RedNet preference is displayed on the screen.

RedNet Control features a tabbed, cybersurfer-suchlike interface and can handle 600 RedNet biases. Configuration runners for each device allow adaptation to sample rate, Grand Master nomination, addict, and other device-specific parameters similar to network configuration.

In the overview runner, accessible RedNet gadgets on the community can be dragged and dropped from the searchable Device List sidebar into a grid on a tab. They're shown graphically, with real-time pointers showing situations and LED status. Each account can display up to 12 biases, and over to 50 charges can be defined, renamed, and reordered. Tabs can also be populated automatically. Discrimination can be grouped logically and intimately on each runner. A multi-location system can include a bill representing each area of an installation, for illustration.

Further hands-on control is needed. RedNet Control features a MIDI ground, allowing any programmable CC- grounded or SysEx MIDI regulator to control up to 16 different mic pre-bias on the network. This allows mic-pre-gain to be fluently counterplotted to an encoder for tactile control.

The CC protocol uses the exact specification as the Avaricious Pre, meaning RedNet 4, RedNet MP8R, RedNet X2P, and the Focusrite Red range of audio interfaces can be controlled from Pro Tools and, in turn, by Avid regulators similar as D- Command, D- Control, or the Artist series. Furthermore, 16 Device and Session shots can be saved and snappily recalled to change device parameters on the cover. Photos can be loaded by opting them from the menu or using a keyboard roadway, MIDI Note, SysEx, or Program Change communication, making tackle control of your mic pre-bias a potentially mouse-free experience.

Features of RedNet Control

• Ideal for controlling large and multi-location systems. (Up to 600 bias)

• Marked cybersurfer-suchlike stoner interface.

• The detailed graphical representations of groups of RedNet bias in over 50 tabs.

• Ever acclimate preamp settings of RedNet MP8R and RedNet 4 bias.

• Channel-by-channel metering of audio situations.

• Up to 96-channels of mic preamp metering on one runner

• MIDI bridging for mic pre-control.

• Control up to 16 mic pre-bias using any programmable MIDI regulator, including Avid D-Command and D-Control.

• Save and recall 16 shots and snappily recall them to change device parameters.

How to use RedNet Control

Software Installation:

Installation packages are reachable for every Mac and Windows. These functions contain the RedNet. Control application, Dante Controller application, PCIe drivers, and MIDI driver (Windows only).

Locate the RedNet Control. Pkg disk picture (Mac) or the Rednet Control.exe file (Windows). The archives can be downloaded from each RedNet product download page or the RedNet Control two homepage.

Let's browse through the key elements in the RedNet Control interface

1. Device List: This shows all units in the community alphabetically. The listing can be customized with the usage of the Device List Filter. Right-click on a title to convey its drop-down menu. ID: prompts the device's ID characteristic (see web page 10); Rename: press Enter to verify or Esc to cancel.

2. Device List Filter Allows the listing to be ordered by specific categories. Select 'Clear All' to do away with all filters:

• RedNet Devices – Filter via machine kind (drop-down list)

• Tab – Filter with the aid of tab identifies (drop-down list)

• Not In Tab – Show non-tab-assigned gadgets

• Sample Rate – Filter by way of machine pattern charge (drop-down list)

• Pull Up/Pull Down – Filter using p.c charge (drop-down list)

• Third Party – Show solely third birthday celebration gadgets three Auto Button Automatically assigns gadgets to the grid.

1. Auto Button

Automatically assigns devices to the grid. The Auto function will give devices as follows

• If there is a device by now in the middle of a tab, it will auto-assign around it, do not overwrite it

• If a Device List filter has been selected, it will only assign visible devices in the List – meaning that the filters be valid.

• Otherwise, choose which devices are to be assigned by selecting their names from the list; multiple devices can be selected.

• A device can only be assigned once.

1. Search Bar -To locate any device in the Device list, type its name into the search bar.

2. Device Grid - Shows a graphical illustration of every hardware unit on the network.

• To add a device, drag its name from the Device List onto the grid – use Cmd/Ctrl (to multiple-select individually, in any order) or Shift (for massive crew selection)

• The grid measurement underneath every tab can be set to show 6 (2x3) or 12 (3x4) units. The measure can be chosen when the new account is created.

• Channel Gain can be set by using both of the following methods: ° Click inner the channel's gain-control icon and make use of the scroll wheel/trackpad (NB. Holding down Cmd/Ctrl will gradual the acquire step modifications for friendly control) ° Double-click the achieve icon to enter a numerical dB cost with the aid of the keyboard – press Enter to verify or press Esc (or click on once more somewhere outdoor the manipulate icon) to cancel

• Click the related icon to toggle a Channel RedNet MP8R 'Setup' View Function on/off

• A device's name can be set both by altering it in the gadget plugin, right-clicking it in the Device List, or by the 'Dante Controller' application.

Tabs Show agencies of 6 or 12 community devices. Tabs can be organized to exhibit personal hardware areas or, for example, gadgets inside a gear rack. Up to 50 charges of any kind can be created. Additional manipulate alternatives are furnished using a Tab Drop-Down Menu. See the following web page for details.

1. Tab Ribbon-Allows Sample Rate and Follow Device selection for each tab. See Tab Ribbon on the following page for full details.

2. Tab Delete -To remove a tab, click the grey 'X' by its name, or use the shortcut: Cmd/Ctrl-W.

3. To insert a new tab, click + the symbol, then click the preferred grid size.

4. Lock- The Lock, shortcut: Cmd/Ctrl-L, prevents tabs from being added, removed, or renamed; prevents devices being additional to the grid; disables the Auto function and prevents the Tab Sample Rate from being changed.

Conclusion

For users who change between one-of-a-kind setups daily, such as throughout performances with more than one act, RedNet Control presents both session and system - store and recall. This lets classes be saved and loaded throughout each Mac and Windows platform. Device saves additionally enable fundamental mic pre parameters to be held at some stage in sound-check and recalled later inside seconds. To Hit Save, then later open the file to identify all the settings or choose which unique settings are remembered - locations can be loaded to any machine of the identical type.

RedNet Control's automated firmware updater ensures that all RedNet units on the community are saved with current firmware. This ensures that the cutting-edge Dante updates from Audinate will be loaded to the device, guaranteeing viable quality performance. Please replace RedNet PCIe drivers at some setup point to ensure they are as up-to-date as possible.

Individual gadgets are proven graphically, and RedNet Control two permits for accelerated machine monitoring, metering, and managing of the considerable majority of system parameters and permits devices to be locked or unlocked for entry to control.