Beginner’s Guide to Studio Rack Mounts for Home Recording (Music Tutorial)

Admin Admin

As home studios evolve into their maturity…

They begin the inevitable process of phasing-out their budget desktop gear…

In favor of the pricier, but generally higher-quality rackmounted gear, commonly seen in pro studios.

However, assembling your first rack is often long and complicated…

And filled with a ton of questions that need answers.

To help you through the process, in today’s post…

I’ve assembled this simple guide for you to follow, once you’ve decided that you’re ready to tackle this important upgrade to your studio.

Let’s begin.  First up…


What Belongs in a Studio Rack?

When building their first rack…the biggest challenge beginners face is that they have no idea what actually goes inside a rack.

So let me show you…

For a basic home studio rig, there are 5 key items you’ll likely need.

They are:

  1. a multi-channel mic preamp 
  2. a power conditioner
  3. a headphone amp  
  4. a monitor management system  
  5. an audio interface 

You won’t need to buy them all at once, but rather…you’ll add them gradually over time, as your needs evolve.

Here’s how it usually happens:

The Typical Story of Growth

As you gain studio experience, there eventually comes a point when you wish to record several-tracks-at-once…

  • possibly to record a drum kit, or…
  • possibly to record a band

The problem is…beginner setups rarely have enough inputs to tackle this job.

After you buy a rack to put it in, the next upgrade you’ll IMMEDIATELY need is a power conditioner

Because to run your preamp, and all the other gear you add later…you’ll need to consolidate the power source for your rack to one device.

At this point, you have a working rack.  And here-after, you can add more items ifand when you need them.

But most likely, the next thing you’ll need is a headphone amp, and here’s why:

Once you have the ability to record several tracks at once, you’ll be recording several musicians at once.  In which case, you’ll need a way for each of them to monitor themselves on headphones, while they’re recording.

The problem is…most audio interfaces have only 1 or 2 headphone jacks.  And a headphone amp is the standard solution if you need more.  

Now sometimes, depending on the audio interface you started with…

You also encounter a problem if the maximum INS/OUTS are no longer enough to keep up with your new demands.  At this point, the only solution is to switch to a better interface that offers more.

And finally…

At some point, many folks eventually start double-checking how their work sounds across a wide-variety of playback devices, by routing multiple mixes to multiple monitors.

And once this task becomes a normal part of your workflow, monitor management systems offer an easy way to mix-n-match different sources with different outputs at the push-of-a-button.

Up next…

Choosing the right size

Now that you have a vision of how your rack will one-day look…the next question to ask yourself is:

How many space will I need?

And here’s what you need to consider:

While your rack probably won’t have more than 5 items, some of those items may occupy more than one space.

Also, you still want to leave a few spaces open, for air venting, storage drawers, and possible future expansion.

So assuming your rack will be similar to the one I described in the first part of this post…a good range to start with is 6-12 spaces8 being the ideal number in most cases.

What to Do with the Extra Spaces

rack accessoriesThe first time you catch a glimpse of your half-done rack…

I guarantee you…that those ugly open spaces will piss you off.

But rather than waste money on unnecessary gear, just to make your rack look nicer…

A better solution is to cover the spaces with these blank panels – (1U/2U), which look awesome, and also allow better cooling for your gear.

Another option is to use those spaces for a drawer – (1U/2U) to store your random tools.

And one last accessory I recommend is a box of rack screws – (25 count/100 count), because you never seem to have enough when you need them.

Up next…

The 3 Basic Rack Styles

studio rack

By this point, we’ve covered all the major questions about planning

So the only thing left to do is find the right rack to buy.

After comparing the many options, what you’ll find is that all racks fit into 1 of 3 categories:

  1. Basic Studio Racks – which are cheapest, and ideal for most home studios.
  2. Portable Racks – which cost slightly more, but are durable, and better for mobile studios.
  3. Premium Studio Racks – which are expensive, but offer several amazing features such as temperature control, and noise isolation, and are ideal for most pro studios.

Here are the top options I recommend in each category:

1. Basic Studio Racks

Raxxess 10 space slant rack

In my experience, the top 3 manufacturers of affordable racks for home recording are:

  • Raxxess
  • Middle Atlantic
  • Odyssey

And to be honest, there’s not a huge difference between one brand and the next.

They all get consistently good reviews, they all get the job done…

And the only real difference is which brand has the look you prefer.

For Raxxess, here’s what I recommend:

For Middle Atlantic:

For Odyssey:

As you may have noticed, the Odyssey racks are a little more “heavy-duty” than the other two.

And that’s because they’re more of a “hybrid” between a studio rack, and this next category…

2. Portable Racks

SKB 4U Shallow X Rack

If you’re a musician, and you perform live, then SKB and Gator need no introduction.

Because for several decades now, they’ve been industry standards for live music.

If you ever meet a guy who says he’s not a fan of SKB cases…

You can almost guarantee he’s loyal to Gator instead.  And vice versa.

For SKB, here’s what I recommend:

For Gator:

Up next…

3. Premium Studio Racks

IsoBox Rack

While I wouldn’t recommend them for home studios…

If you really want the best of the best…

There are several high-end options such as the Isobox, which offer brilliant solutions to common problems with studio rackmounting.

First there’s the noise reduction

The Isobox for example, has a soundproof enclosure, which reduces noise levels from your gear by up to 30dB.  And some even have a tray for your computer as well.

Cheaper racks don’t offer this, mainly because soundproofing restricts airflow, which causes your gear to overheat.  However…

The Isobox handles this problem with silent exhaust fans which keep your gear cool without any additional noise.

Unfortunately, racks such as these often cost several thousand dollars each.  And even though you may not be able to afford one now, it’s still nice to know they exist if and when you can afford one later.

What’s Left to Add?

pro studio rackOnce you’ve assembled a rack with the 5 key items…

At this point, you can basically call it “complete”.

But as I’m sure you’ve seen in countless pictures online…

Pro studios often use hundreds of rackspaces filled with all sorts of fancy gear.

And while your studio will likely never reach that level, there are still several other things you can add…if you want.

Things such as:

  1. a high-end digital converter – which some say, offers better sound quality than the “stock” converters of your interface.
  2. a word clock – which again, can offer superior sound quality compared to the digital clock in your interface.
  3. various analog hardware – which many engineers still say, beats the vast majority of software plugins currently on the market.

Now I wouldn’t recommend these upgrades to most home studios…simply because unless you have money to burn…the huge price jumps simply aren’t worth the nominal gains.

But don’t worry…because you really don’t need all that fancy stuff anyway.  ????